The full phase diagrams of low-density polyethylene (LDPE), high-density polyethylene (HDPE), and isotactic polypropylene (i-PP) mixtures with 1,2,4,5-tetrachlorobenzene (TeCB), including the solubility curve of TeCB in a solid polymer, were constructed by an optical method. The diagrams contain a eutectic point that corresponds to the situation when the crystallization of TeCB out of its solution in a polyolefin is accompanied by the crystallization of monomer units of the macromolecules. As a result, the polymer acquires a gel structure with crystallites as crosslinks and amorphous regions saturated with TeCB. It is demonstrated that the eutectic point position on the phase diagram can be used for ranking polymers with respect to their thermodynamic affinity to a solvent. For the studied systems, the affinity to TeCB was decreased in the order i-PP, HDPE, and LDPE. Direct experimental evidence was obtained that TeCB crystals can be dissolved in a solid polymer via a vapor phase mechanism, which leads to the polymer amorphization. 相似文献
The rearrangement of easily accessible Cookson’s diketone with chlorosulfonic acid in chloroform followed by the acidic hydrolysis gave 6-chloro-7-hydroxy-dichloropentacyclo[6.3.0.02,6.03,10.05,9]undecane-4-one, whose syn-stereochemistry was assigned through the X-ray crystal structure analysis. This key structure was used for the stereoselective synthesis of the D3-trishomocubane derivatives as well as for the preparation of potential drugs bearing hydroxy- and amino-functional groups. A new multigram preparative synthesis of D3-trishomocubane was developed. 相似文献
The isotherms of benzene sorption by the metal–organic coordination polymer [Zn2(bdc)2(dabco)] were studied within the temperature range 25–90 °C at pressures up to 75 torr. The maximal benzene content in [Zn2(bdc)2(dabco)] at room temperature was demonstrated to correspond to the composition [Zn2(bdc)2(dabco)]·3.8C6H6. It was established that the process of benzene desorption from the substance under investigation occurs in three stages. (1) Evaporation of benzene from the phase of variable composition (phase C) with compression and distortion of the unit cell (the composition of the phase C varies from [Zn2(bdc)2(dabco)]·3.8C6H6 to [Zn2(bdc)2(dabco)]·3.2C6H6). (2) The transformation of the phase C into phase P. The phase P has the same unit cell geometry as that for the empty framework. The maximal benzene content is [Zn2(bdc)2(dabco)]·1.0C6H6. (3) Benzene evaporation from the phase P of variable composition. We studied the temperature dependences of the equilibrium vapor pressure of benzene for the samples with compositions [Zn2(bdc)2(dabco)]·3.0(3)C6H6 and [Zn2(bdc)2(dabco)]·2.0(3)C6H6 within the temperature range 290–370 K. The thermodynamic parameters of benzene vaporization were determined for the latter compound ($ \Updelta {\text{H}}_{{{\text{av}} .}}^{o} = 49\left( 1 \right) \,{\text{kJ }}\left( {{\text{moleC}}_{6} {\text{H}}_{6} } \right)^{ - 1} $; $ \Updelta {\text{S}}_{{{\text{av}} .}}^{^\circ } = 100\left( 3 \right)\, {\text{J}}\left( {{\text{moleC}}_{6} {\text{H}}_{6} {\text{K}}} \right)^{ - 1} $; $ \Updelta {\text{G}}_{298}^{^\circ } = 19.0\left( 2 \right)\, {\text{kJ}}\left( {{\text{moleC}}_{6} {\text{H}}_{6} } \right)^{ - 1} $). 相似文献
A sol–gel based hybrid process was developed by manipulating different techniques in sol–gel process to synthesize γ-alumina and (CuO, CuO + ZnO) doped γ-alumina spherical particles. Catalysts having spherical geometry have an important advantage over powders or pellets which are impervious to fluids, when packed in a reactor. Boehmite sol was used as alumina precursor for synthesizing porous γ-alumina and doped materials. γ-alumina particles having 5 wt% CuO, 4 wt% CuO + 1 wt% ZnO, 3 wt% CuO + 2 wt% ZnO and 2 wt% CuO + 3 wt% ZnO were prepared by adding required amounts of Cu(NO3)2 and Zn(NO3)2 solutions prior to gelation of the sol. Methanol dehydration studies were carried out by employing these synthesized catalysts. Hundred percent conversion of methanol to dimethyl ether was observed with (4 wt% CuO + 1 wt% ZnO)-γ-alumina and (5 wt% CuO)-γ-alumina microspheres at 325 and 350 °C, respectively. 相似文献
The reactions of bis(borohydride) complexes [(RN?)Mo(BH4)2(PMe3)2] ( 4 : R=2,6‐Me2C6H3; 5 : R=2,6‐iPr2C6H3) with hydrosilanes afford new silyl hydride derivatives [(RN?)Mo(H)(SiR′3)(PMe3)3] ( 3 : R=Ar, R′3=H2Ph; 8 : R=Ar′, R′3=H2Ph; 9 : R=Ar, R′3=(OEt)3; 10 : R=Ar, R′3=HMePh). These compounds can also be conveniently prepared by reacting [(RN?)Mo(H)(Cl)(PMe3)3] with one equivalent of LiBH4 in the presence of a silane. Complex 3 undergoes intramolecular and intermolecular phosphine exchange, as well as exchange between the silyl ligand and the free silane. Kinetic and DFT studies show that the intermolecular phosphine exchange occurs through the predissociation of a PMe3 group, which, surprisingly, is facilitated by the silane. The intramolecular exchange proceeds through a new non‐Bailar‐twist pathway. The silyl/silane exchange proceeds through an unusual MoVI intermediate, [(ArN?)Mo(H)2(SiH2Ph)2(PMe3)2] ( 19 ). Complex 3 was found to be the catalyst of a variety of hydrosilylation reactions of carbonyl compounds (aldehydes and ketones) and nitriles, as well as of silane alcoholysis. Stoichiometric mechanistic studies of the hydrosilylation of acetone, supported by DFT calculations, suggest the operation of an unexpected mechanism, in that the silyl ligand of compound 3 plays an unusual role as a spectator ligand. The addition of acetone to compound 3 leads to the formation of [trans‐(ArN)Mo(OiPr)(SiH2Ph)(PMe3)2] ( 18 ). This latter species does not undergo the elimination of a Si? O group (which corresponds to the conventional Ojima′s mechanism of hydrosilylation). Rather, complex 18 undergoes unusual reversible β‐CH activation of the isopropoxy ligand. In the hydrosilylation of benzaldehyde, the reaction proceeds through the formation of a new intermediate bis(benzaldehyde) adduct, [(ArN?)Mo(η2‐PhC(O)H)2(PMe3)], which reacts further with hydrosilane through a η1‐silane complex, as studied by DFT calculations. 相似文献
Insufficient sensitivity of methods for detection of proteins at a single molecule level does not yet allow obtaining the whole image of human proteome. But to go further, we need at least to know the proteome size, or how many different protein species compose this proteome. This is the task that could be at least partially realized by the method described in this article. The approach used in our study is based on detection of protein spots in 2DE after staining by protein dyes with various sensitivities. As the different protein spots contain different protein species, counting the spots opens a way for estimation of number of protein species. The function representing the dependence of the number of protein spots on sensitivity or LOD of protein dyes was generated. And extrapolation of this function curve to theoretical point of the maximum sensitivity (detection of a single smallest polypeptide) allowed to counting the number of different molecules (polypeptide species) at the concentration level of a single polypeptide per proteome. Using this approach, it was estimated that the minimal numbers of protein species for model objects, Escherichia coli and Pirococcus furiosus, are 6200 and 3400, respectively. We expect a single human cell (HepG2) to contain minimum 70 000 protein species. 相似文献
This article considers the possibility of applying the positron annihilation spectroscopy method for investigating the pore space of rocks from oil-gas and methane-coal deposits. The diagnostics of the structure was performed using the method of spectrometry of angular correlation of annihilation rays (ACAR). Using the samples of porous silicon, the authors have shown the applicability of the ACAR method for determination of the average dimensions of spherical and cylindrical nanosized objects and their concentration 相似文献
The broadband enhancement of single‑photon emission from nitrogen‐vacancy centers in nanodiamonds coupled to a planar multilayer metamaterial with hyperbolic dispersion is studied experimentally. The metamaterial is fabricated as an epitaxial metal/dielectric superlattice consisting of CMOS‐compatible ceramics: titanium nitride (TiN) and aluminum scandium nitride (AlxSc1‐xN). It is demonstrated that employing the metamaterial results in significant enhancement of collected single‑photon emission and reduction of the excited‐state lifetime. Our results could have an impact on future CMOS‐compatible integrated quantum sources.
